Driver Installation fot TEDIA PCI Express Communication Cards
*************************************************************

System driver version: 2.0.5.0  

Supported OS:
- Windows 11
- Windows 10 x64
(for Windows 7 to Windows 10 x32 use the previous driver version)

Supported TEDIA PCI Express cards:
- PCI-1232E
- PCI-1234E
- PCI-1414E
- PCI-1434E
- PCI-1482E
- PCI-1484E



1.  Driver contents
===================
If the driver is compressed, unpack the files into a desired folder.


2.  Driver pre-installation
===========================
The driver does not support driver pre-installation before inserting
the card into the PC. 


3.  Installing the card into the computer
==========================================
While installing the card, please follow the principles for handling
the circuits, which are susceptible to the electrostatic discharge 
damage. Touch the card carefully only by the edges, and do not touch
the components or metal contacts on the bottom of the card.
The computer must be switched off before the card is installed. 

After removing the slot cover plate, plug the configured card into 
a free slot for the expansion cards and screw it in place. 
Refer the user manual for more information.


4.  Computer switch-on & driver installation
============================================
Switch on the computer. 
Please be sure you have got Administrator rights in your user profile.

Launch Device Manager, select all instances of the communication card in 
the Other Devices folder, and update the driver by selecting Browse my 
computer for driver software, pointing to the folder with the driver files.

You may find more detailed information in the card user manual or at
the manufacturer website.


5.  Driver uninstallation and card removal
==========================================
In the Windows Control Panel in the Device Manager -> Ports (COM & LPT),
find the COM ports that belong to the card yu need to remove. Right-click
on the COM ports and choose Uninstall.

Launch Device Manager, in the Ports (COM & LPT) folder, right-click on
the relevant COM ports and choose Uninstall.
Then switch off the PC and remove the card from the slot.


===============================
http://www.tedia.cz
http://www.tedia.eu
(c) 1994-2025 TEDIA spol. s r. o.
